How to Keep Your Deck Looking Good and Prevent Problems

Regular cleaning and inspections will keep your deck looking good and prevent problems. Before staining, check that the wood is dry and cover nearby plants with plastic sheeting to protect them from excess cleaner or stain.


Use a screwdriver to probe around wood areas, especially the ledger (the part that connects the deck to your house). Soft spots are a sign of rot and should be treated promptly. To learn more, visit

The ledger board is the 2” by 10” or 2” by 12” piece of lumber that connects your deck to your house or another deck-anchoring structure. It provides essential structural support and distributes the weight of the decking, and is one of the primary locations where a deck can experience dry rot.

If you have a wood deck, a properly attached ledger is critical to the longevity of your deck. If the ledger has been secured only with nails or other fasteners, it should be re-attached using lag screws or bolts. If a ledger is pulled away from the home, it can lead to significant damage.

In addition to checking the condition of the ledger and ensuring that it is properly flashed, you should also examine your deck posts for signs of rot. A slender screwdriver or awl can be used to test the integrity of a post by poking into the grain. If the tip of the tool can easily penetrate deeper than 1/4 to 1/2 inch, it is likely that the post is rotting.

A weakened deck can pull away from the house or cause a ceiling collapse, which poses serious safety risks for anyone standing on the deck. If you see any cracks in the posts or visible rot, have a professional inspect them immediately.

If a rotting deck or porch is not addressed promptly, it can cause serious damage to the home and result in expensive repairs. Fortunately, dry rot is preventable with the proper knowledge and preventative measures. Taking these steps can help you avoid costly and dangerous problems in your deck remodel project.

With the right preventative maintenance and attention to details, your deck can be a functional, safe part of your home for years to come. If you are considering a deck remodel, contact Trex to learn more about our state-of-the-art protection for ledger boards and flashing. By understanding the role and importance of these components, you can keep your deck in good shape for the long haul.

Clean the Deck

Decks require year-round attention to keep them safe and attractive. If your deck is in bad shape, it can be a slip-and-fall hazard and a breeding ground for mold and mildew. Keeping up with the maintenance will also help prevent moisture damage that can cause wood rot and insect infestations.

To start, you should clear the area around your deck to make it easier to work and avoid harming nearby plants with soap spray. Move outdoor furniture, grills, toys, and rugs to a safer location while you clean the deck. You should also cover any plants that might be affected by the soapy water with tarps or plastic sheets.

Begin with sweeping to remove any loose debris such as dirt, leaves, sticks, and mold and mildew. Next, scrub the surface of your deck with a stiff brush and a strong household cleaning solution. You can buy a commercial cleaner at any home improvement store, or you can use a mixture of 1 cup oxygen bleach per gallon of water to scrub away the grime. Scrub a small section at a time, and be sure to scrub the corners and any nooks and crannies where stains tend to develop. Rinse the deck thoroughly with a garden hose to wash off the cleaning solution and leave it looking clean.

As you rinse the deck, look for any rotten boards that might need to be replaced. Examine the ledger board to see if there is any moisture damage or a gap between it and your house, and check for signs of wood rot in the posts and joists beneath the deck. If you find any rotting, make a note of it and be prepared to replace the affected boards.

You should also sand the surface of your deck with a pole sander to smooth it and remove any rough edges. Once the sanding is complete, rinse the deck again to wash off any remaining grit and dust. Then, let it dry for several hours before resuming use. Factors such as weather, temperature, and humidity affect the amount of time it takes for your deck to dry completely, so be sure to watch the weather forecast before you resume use.

Inspect the Railings and Stairs

A deck can become a dangerous place for children and adults if the railings or stairs are damaged. Inspecting these areas regularly can prevent injury to anyone using the deck and help keep the structure safe for use.

A Deck’s Frame

Concrete footings spread the weight of a deck and its occupants over a greater surface area, protecting the wooden joists and ledger boards below. Examine these structural components for rot, loose nails and screws and other damage.

Insect Damage

Wood-boring insects such as termites and carpenter ants can damage decks, especially if they aren’t treated with insect-resistant wood. Check for signs of infestation such as a musty odor, small holes in the wood surface and soft, hollow areas that feel soft when you press on them. If you notice any of these signs, hire a pest control specialist immediately to protect your investment and avoid costly repairs later.

Stairs and Railings

Check stairs, railings and handrails for loose or rusty nails and screws that need to be tightened or replaced. Make sure that the balusters (vertical elements) aren’t spaced too far apart, as this can cause a hazard for young children who may get their head caught in between them. It’s also a good idea to check that the handrails meet established building codes for height and strength.

A well-maintained deck can be a great addition to your home, adding comfort and value to your outdoor living spaces. Inspecting a deck regularly for loose boards, cracks, splinters, and other damage will ensure that it’s safe for everyone who uses it. If you aren’t comfortable performing complex repairs or replacing deck boards, contact a professional for assistance. A contractor can perform a thorough inspection and complete any necessary repairs quickly and effectively. They can also advise you about the best finish for your deck to keep it looking its best and to protect it from moisture and sun damage. For example, they can recommend a stain that will resist fading and discoloration from UV light. They can also provide advice about other protective treatments, such as a waterproof sealant or an aluminum barrier.

Replace Damaged Boards

Some cracking and warping are normal for most decks, but if the problem is extensive you may need to replace some boards. If the deterioration is localized, though, it could be possible to simply repair the damaged areas rather than replace all of the boards on the deck.

Loose floorboards can be a safety hazard and they also allow water to seep under the boards and cause rot and mold. It’s important to prioritize long-term safety and consider replacing loose boards as soon as you notice them.

If a board is severely cracked, chipped or gouged it needs to be replaced. These types of problems can lead to splinters and make the deck unsafe.

Wood and fabricated decks will experience different natural damages, so your maintenance schedule should be adapted to reflect the type of deck you have and its environment. Decks in rainy climates, for example, will need to be inspected and cleaned more often than those in dry climates since the deck is more susceptible to moisture damage.

Staining wood is an easy way to protect it from moisture damage, but you should only stain the deck once it’s completely dry. This means that the stain has had time to absorb fully and the wood has had time to expand and contract according to weather conditions. You can test the wood for drying by applying water to a small section of the deck and observing how quickly it becomes saturated.

A few spots of graying from the sun is a normal part of the aging process for deck boards, but if you have large sections that have turned black this indicates rot and the affected boards will need to be replaced. You can try to restore the color of the wood by sanding the affected boards, but this will only be effective if the rot is localized and the board is not structurally compromised.

If a board is popped up from the deck’s surface, use a hammer and nails to knock it back down into place. You can also line up a new nail near – but not in – the old hole and hammer it down. Be sure to check the deck and replace any popped nails and study all of the hardware to ensure that everything is still secure and properly fastened to the joists, posts and beams.

Pumping Your Septic Tank

All plumbing in your home feeds into the septic tank. Wastewater moves through a pipe to the tank where bacteria decompose some of it. Solids sink to the bottom in a layer known as sludge. Oils and grease float to the top in a layer called scum.

The middle layer of wastewater, referred to as effluent, pumps into the drain field. A septic tank can last for decades with proper care. Click the to know more.

Many people dream of moving from city living to a house with a lot of land and privacy. If that dream includes a property with a septic tank, it is important to understand how septic tanks work and the proper care of the system. One thing that you will want to do is get the septic tank pumped regularly. This is a process that involves digging up and removing the waste from the tank. It also requires the help of a professional. When it comes time to pump your septic tank, make sure that you hire a reputable company that is licensed, insured, and has experience. The professionals will need to locate the septic tank, dig up some of the surrounding area if necessary, and remove the lid. They will then begin removing the sludge and solid waste from the tank with a suction pump similar to that of a vacuum cleaner.

As the waste is pumped out of the septic tank it will be transported to what is called a drain field or leach field. The wastewater that goes into the absorption field is filtered by soil and gravel before being absorbed into the groundwater supply. It is important that you keep trees and long-rooted plants away from the drain field because they may grow into the pipes and clog them.

When you are getting your septic tank pumped it is also a good idea to have the professionals check out the entire septic system. The technician will look for any problems and suggest any repairs or replacements that may be needed. The technicians will also listen to the sound of the tank as it is being pumped. This is done so that they can hear any leaks or cracks in the tank or piping.

Once the solid waste and sludge are removed from the septic tank the effluent will flow into the absorption field through a series of porous pipes. It will then flow into the soil and water supply, where bacterial action will continue to treat it before it enters the groundwater.


A septic tank gathers wastewater – toilet and bathroom waste, washing machine water and garbage disposal – from homes and holds it under the ground. Solids sink to the bottom of the tank, and liquid waste exits through a buried drain field. It’s important to have a septic system that works properly to avoid serious contamination of groundwater and nearby bodies of water. To keep your septic tank healthy, it should be inspected and pumped regularly. Signs that you need to do so include gurgling pipes, slow draining toilets and backflow into drains.

A home with a septic system is less expensive to live in than one that relies on public sewer, but the system does require more maintenance. For example, septic tanks need to be emptied every three years or sooner, and they may need to be drained more frequently if the number of people living in the house is high. It’s also a good idea to use biological additives, which help reduce the buildup of sludge in your septic tank.

The best way to ensure your septic tank works properly is to have it inspected by a licensed professional. Inspectors will check the size of your septic tank and how many people live in your home, and they will recommend an appropriate amount of sludge to remove from the tank. They will also look at the septic tank’s condition, including checking for cracks or leaks.

If you are buying a home with a septic tank, ask the seller to provide inspection records. These can help you spot potential problems, such as tree roots that are blocking septic tanks. Then, you can take steps to prevent them from occurring before they become a problem.

A septic tank is a large, watertight container that receives all of your household’s waste. The waste separates into 3 layers: sludge, effluent and scum. The heavy solids sink to the bottom of the tank and the liquid waste exits through a buried system of pipes into a drain field, where bacteria filter it further before it enters soil.


A septic tank is a large, watertight container that’s typically made of concrete or fiberglass. It’s buried beneath the ground near your home, and it holds household waste until microorganisms break it down. Solids sink to the bottom, forming sludge, while grease and oils float to the top as scum. A T-shaped outlet pipe carries the liquid wastewater into a drainfield area for absorption.

When a septic system is properly cared for, it will work without a hitch for years to come. But, over time, a septic tank can become clogged with sewage and other debris that will require it to be repaired or replaced.

There are several warning signs that it’s time to call a septic tank repair expert, like when your toilets start to backup or smell awful. If you notice any of these problems, it’s important to contact a septic tank service professional for inspection as soon as possible.

Another sign it’s time for a septic tank repair is when the inlet baffle at the entrance to the tank becomes clogged with toilet paper, debris, and other waste. The inlet baffle is an essential component that prevents solids from traveling into the drainfield and house, so it’s important to keep it clear of obstructions.

You may also notice that the septic tank is filling up faster than it should, which could be a result of a crack or structural issue. Keeping your septic tank pumped regularly can help you avoid this type of problem in the future.

The final common sign that it’s time for a septic system repair is when the drainfield becomes clogged with sewage. This can cause sewage to back up into your home and create foul odors in the yard. Depending on the severity of the problem, you might need to install a new drainfield or upgrade to a septic tank with a pump.

Keeping your septic system in good working condition is an investment that can save you thousands of dollars over the life of your home. Getting your septic system pumped and having it inspected annually is the best way to keep it operating smoothly.


Once a septic tank has been installed, it must be connected to the plumbing system of the home. This involves laying pipes, inlet and outlet tees and distribution boxes. It is important to make sure that all connections are water tight to prevent leaks and contamination.

A good septic tank installation company will provide clear and comprehensive quotes before starting the work. They will also be able to offer advice on the best septic system for your property and budget. They should have insurance that covers their workers in case of an accident while working on your septic system.

There are many different types of septic systems available and the one you choose will depend on your needs. Conventional systems have a large tank that holds excess wastewater and a drain field that disperses the wastewater into soil and grass. These fields have trenches filled with gravel and sand that help filter the wastewater as it percolates through the ground.

The septic tank has inlet and outlet tees that extend down below the scum layer. This creates hydraulic pressure to force wastewater up through the tees and out into the absorption field. This tee system helps ensure that no solids make their way out of the septic tank into the absorption field, which would clog it and reduce its efficiency.

You can help ensure that your septic tank and drain field are performing well by keeping plants and shrubs away from the immediate area of the absorption field. You should also ensure that downspouts are pointing away from the absorption field, as they can direct stormwater into it and flood it. It is also a good idea to limit how much water your household uses. This will not only reduce septic tank overflow, but it will also save you money on your utility bills.

If your septic tank is having problems, you should contact professionals right away. It is important that you do not try to fix the problem yourself, as this could lead to sewage backing up into your home. It is also important to have your septic tank pumped when the weather is dry. This will avoid the septic tank and surrounding ground from being oversaturated with mud, which can damage the system.

Why You Should Hire a Truck Accident Lawyer

The right Duluth Truck Accident Lawyer can help you recover the compensation you deserve. They will investigate your case, build a strong evidence file, and handle all communication with the insurance company.

They will determine liability and pursue various damages, including medical bills, pain and suffering, loss of income, and more. They can also secure punitive damages, which aim to punish the at-fault party and deter similar behavior in the future.


Truck Accident Lawyer

A truck accident lawyer has extensive knowledge of federal and state laws that govern the trucking industry. These laws address everything from driver health and safety to logging and maintenance procedures. They also cover truck driver training, licensing and testing. This information is important when proving liability for a truck accident injury case. Proving that the truck driver or their agency violated a legal duty of care is the first step in recovering damages for your injuries and losses.

They review the evidence in your claim, interview witnesses, consult subject matter experts and build a strong case to determine who is responsible for your accident and injuries. In some cases, multiple parties may be liable for your injuries, including the truck driver and their employer, as well as the owner of the truck or the shipper of the goods being transported. They will identify all possible defendants and assess their insurance policies to determine how much compensation you could receive.

Once they have determined who is liable for your injuries, they will pursue financial compensation from the at-fault party. They will calculate the monetary value of your damages and work to recover all of your expenses, including medical bills, lost income, property damage, and emotional distress. They will also seek compensation for future losses that could arise from your injuries, such as diminished quality of life and loss of enjoyment of activities.

Their expertise will help them negotiate with the insurance companies to get you a fair settlement. They will be prepared to counter any insurance company tactics, such as calling you while you are recovering or sending low-ball offers. They will also handle all communication with the insurance company so you can focus on healing.

A competent New York City truck accident lawyer can take the burden off you and your family by handling all the legal details of your case. They will investigate your claim, identify the at-fault party, build a strong evidence file and fight for you in court if necessary. Their goal is to help you recover the financial compensation you deserve so that you can put your injuries and losses behind you and move on with your life.


A truck accident attorney with a good reputation will help you achieve the best possible outcome for your case. This means they will negotiate with the insurance companies for a fair settlement. They will also prepare and file all the legal documents needed for your case. This will save you time and effort, so you can focus on healing from your injuries.

Regardless of whether you were hurt in an accident with a large truck or a regular car, your medical bills and other losses will be significant. Moreover, you may be dealing with non-financial losses, like pain and suffering. In order to get full compensation, you will need to prove that the other party owed you a duty of care, that they breached this duty, and that this negligence caused your injuries. A top NYC truck accident lawyer can take on the burden of proving all these elements on your behalf.

In addition, your attorney will conduct a thorough investigation to find every defendant. This will include identifying trucking companies, contractors, employers, vehicle manufacturers, and insurance providers. Depending on the circumstances, you might need to file multiple lawsuits against the different parties involved in the crash.

Another reason why you need a reputable truck accident lawyer is that trucking companies have the resources to fight any injury claim. They have large legal departments and a lot of money to spend on lawyers. This makes them a tough adversary for victims who try to fight the claims process on their own.

The truth is that most people are afraid to share the road with trucks because they worry about being seriously injured in a collision. This is understandable, since a fully loaded truck can weigh 20 times as much as a passenger vehicle. Therefore, it is no wonder that many people suffer severe injuries in truck accidents.

Despite these dangers, truck drivers are not entirely to blame for truck crashes. They must follow strict regulations set by federal and state law, including undergoing drug tests and following mandatory break times to prevent fatigue. However, these laws are often broken by trucking companies that hire them and other parties involved in the supply chain.


In addition to evaluating and documenting your losses, a truck accident lawyer can also negotiate with the insurance companies for a fair settlement while you focus on getting well. This can include medical expenses, lost income due to missed work, property damage, future costs for ongoing therapy and rehabilitation, and pain and suffering.

The main job of a truck accident attorney is to build a strong case that supports your claim for compensation. They can review all the evidence and identify potential responsible parties, including the truck driver and their employer. They can also assess the monetary value of your damages and work with experts to support their assessment.

Truck accidents can be caused by many different factors, from driver error to equipment failure. An experienced New York truck accident lawyer can use a thorough investigation to find all the evidence and determine who can be held accountable. For example, if the truck swerved into your lane because the driver was distracted or exhausted, or if the steering system failed due to faulty manufacturing or poor maintenance, the lawyer will investigate all the factors and determine which party should be held accountable.

Once they have put together an airtight truck accident case that definitively demonstrates the defendants’ liability and exhaustively catalogs your losses, they will negotiate with the defendants’ insurance carriers to reach a settlement. This is where a truck accident lawyer’s experience can make all the difference, as they have dealt with these types of insurance cases before and know how to push back against unfair offers.

If there are any liens or letters of protection on your file, the attorney will work to have them removed as soon as possible. This can help you avoid having to pay for your medical bills out of pocket, and it can also ensure that any settlement or judgment is not offset by debts owed by you or your family members. This is one of the reasons why you should only hire a qualified New York truck accident lawyer with extensive experience in these types of cases.


A truck accident lawyer will help you to navigate the complexities of your case and obtain maximum compensation. They will review your medical records and police reports to determine the potential value of your claim and will demand a fair settlement from the insurance company. This process will take time and may require specialized resources, such as a forensic investigator or expert witnesses. As a result, their fees will be higher than those of an attorney who handles simple cases.

Truck accidents are complicated by the fact that there may be multiple liable parties, including the truck driver, the loading company, and the shipping company. This can make it difficult to identify and pursue all possible avenues for compensation. Additionally, trucking companies are subject to many regulations, including safety regulations, mandatory drug tests, and maximum hours of work per shift.

Hiring a skilled truck accident lawyer can save you money in the long run. They will be able to negotiate with the insurance company and get you a much larger settlement than you would have received on your own. Additionally, they will help you to recover lost income, property damage, and pain and suffering. In some cases, they can even assist with wrongful death damages.

When hiring a truck accident lawyer, look for one with a track record of success in this type of case. They should also be communicative and willing to answer your questions within a timely manner. They should also be able to provide you with estimates of typical legal fees for this type of case.

You will want to hire a truck accident lawyer who works on a contingency fee basis. This means that they will charge you a fee only if they win your case. Considering that you may be dealing with medical bills, car repair costs, loss of wages, and other expenses after a crash, it is essential to hire a truck accident lawyer who follows this model. By doing so, you can rest assured that you will have access to a top-notch attorney without having to pay out-of-pocket fees.